Mechanical Piping Contractor / Dayton, Ohio
IRHX, SFN, and CFN loops. Chilled water mains. Condenser water headers. Every system passes Nitro, Hydro, Glycol, and Flushing before handover.
01Data Center Cooling & Hydronic Piping
Three disciplines. One crew. Rack-level coolant loops through the chilled water plant that feeds them.
Direct-to-Chip (DLC) Cooling
Stainless and high-purity coolant loops from the CDU to the rack. We install, pressure test, and fill.
Chilled & Condenser Water
Large-bore chilled water mains, condenser water headers, and closed-loop hydronic distribution.
Mechanical Room Installation
Chiller and CRAH/CRAC tie-ins, pump sets, and heat exchanger piping packages.
Estimator Summary
The six lines a general contractor needs before inviting us to bid.
02Testing & Commissioning Protocol
Every system runs the same order before it carries production coolant. No stage is skipped. No stage is reordered.
Stage 01 / 04N2
Dry nitrogen pressure and air leak verification.
The loop is charged with dry nitrogen and held. Joints are proven tight before water or coolant enters the system.
Stage 02 / 04H2O
Hydrostatic strength and pressure testing at peak operating load.
Piping is filled, brought to test pressure, and held for the specified duration. Every joint is inspected. Results are documented.
Stage 03 / 04PG/EG
Fluid chemistry, freeze protection, and inhibitor analysis.
Concentration, freeze point, and inhibitor levels are sampled and verified against the specification.
Stage 04 / 04FLUSH
High-velocity flushing, micronic filtration, and cleanliness verification.
Loops are flushed at velocity through micronic filtration until cleanliness is verified. Cold plates and heat exchangers are protected at handover.
Safety Standard
OSHA 10 is required for every field worker. OSHA 30 is required for every supervisor.
Field
Front-Line Field Crews
Required for every pipefitter, welder, and field crew member on site.
Supervision
Supervisors & Leadership
Required for every site supervisor, foreman, and project lead.
✓ No exceptions on any Arc Tech jobsite.
03About Us
Arc Tech LLC operates from 9667 Quailwood Trl, Dayton, OH 45458. Founder Arun Panicker runs the company.
Our trade scope is data center liquid cooling, hydronic piping, and mechanical room installation. Every loop we install goes through Nitro, Hydro, Glycol, and Flushing before turnover.
Crews mobilize up to 250 mi from Dayton, OH, covering the Columbus / New Albany data center corridor, Cincinnati, and Cleveland.
04Contact Us & Bid Portal
Send drawings, specifications, and schedule. Include pipe sizes, materials, and test requirements.